13
FIGURE 6 FIGURE 7
Locking Tab
Handle Slot
Black Bar
DISASSEMBLY INSTRUCTIONS
WARNING: ALWAYS MAKE SURE THE COLD PRESS JUICER IS UNPLUGGED
BEFORE STARTING DISASSEMBLY.
1. The lid is locked when the locking tab is fully inserted into the handle slot in the upper rim
of the processing bowl and perfectly aligned with the black bar. Holding the Cold Press Juicer
rmly by the motor base handle in one hand, grasp the hopper in the other hand and turn the lid
counter-clockwise to unlock. (See Figures 6 and 7.) Remove the lid for cleaning.
2. Lift the stainless steel juice strainer up and out of the processing bowl. Rinse in warm running water.
3. Grasp the crushing auger rmly and pull straight up and out of the processing bowl.
Rinse immediately in warm running water.
4. Use gentle pressure to
lift the processing bowl
up and off the 4 bowl
locks on the motor base.
Rinse immediately in
warm running water.
5. Follow the procedures
outlined in the Care
and Cleaning Instructions
for specic cleaning
instructions.
CAUTION:
Use care when handling.
SO-309848_BELLA NutriPro_IM_r5.indd 13 12-09-04 2:18 PM
To Next Page
Loading...
Need help?
General
