15
6. Rinse the crushing auger in warm running water. Use the cleaning brush to remove any debris
from the base of the auger.
7. Rinse the processing bowl in warm running water. Use the handle of the cleaning brush to help
clear pulp from the spout; rinse well.
8. Wipe the exterior of the motor base with a damp sponge, cloth, or paper towel. Use any mild
liquid dish washing detergent but DO NOT use products containing ammonia or scouring
powders. These products will dull, scratch or mar the surface.
9. If any juice has spilled under the Cold Press Juicer or either of the handled cups, clean legs
and countertop area with a lightly soaped sponge, then dry.
10 The Cold Press Juicer’s food pusher, lid, stainless steel juice strainer, crushing auger, processing
bowl, 2 handled cups and cleaning brush may be washed in the top rack of a dishwasher.
However, a light scrubbing with the cleaning brush and mild dish washing soap in warm
(not hot) tap water and a thorough rinse after each use should be sufcient.
STORING INSTRUCTIONS
1. Unplug the Cold Press Juicer. Following the Assembly Instructions described in this Instruction
Manual, assemble clean, dry parts before storing.
2. Store the food pusher in the hopper of the lid.
3. Store the Cold Press Juicer in its box in a clean, dry area.
4.
Do not put any stress on the cord where it enters unit, as this could cause cord to fray and break.
SO-309848_BELLA NutriPro_IM_r5.indd 15 12-09-04 2:18 PM
To Next Page
Loading...
Need help?
General
