Telescopic shelves
In addition to the traditional shelving
fitted into your appliance, the tele-
scopic shelving system is fitted in the
most commonly used location in your
cavity.
The shelves with the telescopic system
are easier to pull out than traditional
shelving, which means the oven door
stays open for a shorter period of
time. The smooth action also reduces
the likelihood of fat, or food, spillage,
and gives you extra security.
You do not have to use the telescopic
shelves all of the time, you can place
the shelves in the traditional positions
if you would like more choice.
The telescopic shelves remove easily
from the runner for re-positioning or
cleaning, but we recommend that you
reposition your shelving before cook-
ing, and remove the shelving for
cleaning when the shelves are cold to
prevent burning yourself.
To remove the telescopic
shelves
Make sure the shelf is cool enough to
touch.
Push the oven shelf back into the cavi-
ty, until it hits the stop position.
Grasp the shelf bars in the centre,
and lift the back of the shelf clear of
the stop position.
You can then lift the front of the shelf
clear of the retaining tabs.
To replace the telescopic
shelves
Make sure the oven runners are
pushed all the way back into the cavi-
ty.
Tilt the shelf and make sure the front
of the shelf is against the stop posi-
tion.
Carefully place the shelf back onto
the runner and snap in place firmly.
Make sure the back of the self is
inside the retaining tabs and slide it
in and out of the oven to make sure it
works correctly.
Standard shelves
Standard shelves are removed by
pulling them straight out towards you
and are replaced by sliding them
straight into the oven to the back of
the cavity. These shelves can be
cleaned in the dishwasher.
Cleaning
To Next Page
Loading...
