EasyManua.ls Logo

Belling BI 60G - Page 31

Belling BI 60G
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION
Anti-stain trim (if tted)
Theanti-staintrimisfactoryttedtothe
edges of the appliance front frame.
This trim provides the cabinetry with
extra protection from any escape of heat.
- When Installing the product, ensure
the anti-stain trim is correctly located
on the edges of the front frame, before
positioning and securing the appliance to
the cabinet.
-Whensecuringtheappliance,thexing
screws provided are driven through the
anti-stain trim into the cabinet.
Note:Whensuppliedtheanti-staintrim
may be loose and is only supported by
plastic rivets. The anti-stain trim will be
securedwhenthexingscrewsarefully
home into the cabinet. The plastic rivets
should not be removed.
Edging strip (if tted)
Theedgingstripisfactoryttedtothe
edges of the appliance front frame. This
strip provides the cabinetry with extra
protection from any escape of heat.
When installing the product, ensure that
the edging strip is correctly located on
the outer edges of the front frame, before
positioning and securing the appliance to
the cabinet.
Whensecuringtheappliance,thexing
screws provided are driven through the
edging strips into the cabinet - the seal
willstraightenupandsitushtothe
cabinet when the screws are fully home.

Related product manuals