EasyManua.ls Logo

Belling BI602MFPY - Bulb Replacement

Belling BI602MFPY
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
The oven shelves can also be hooked onto the shelf runners
Before removing the shelves completely, please make sure that the shelf is unclipped from the retaining
tabs.
BULB REPLACEMENT
Risk of electric shock!
Glass cover
You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales
service.
For replacement, proceed as follows:
1. Disconnect power from the mains outlet or switch off the circuit breaker
of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it
may be stiff) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
Note: Only use 25-40W/220V-240V, T300°C halogen lamps

Related product manuals