Belling BI602MFPY - Page 9

9
1. Press the Clock key once, and the hour gures will begin to ash.
2. Rotate K2 to adjust the hour gure. The numbers go from 0-23.
3. Press the Clock key to set the hours and move onto the minutes.
4. Rotate K2 to adjust the minutes gure. The minutes go from 00-59.
5. Press the Clock key to nish setting the clock. The “:” will begin to ash. This signals that setting the
Time of Day has been successful.
Note: If the clock is not set when rst connected to the power, it will display 00:00.
Setting the Minute minder
This cannot be set when cooking functions are being selected.
The clock is displayed as “h:mm”.
1. Press the Minute Minder key. The display should show “0:00” and the the hours digits will ash.
2. Rotate K2 to adjust the hour gure. The numbers go from 0-9.
3. Press the Minute Minder key to set the hours and move onto the minutes.
4. Rotate K2 to adjust the minutes gure. The minutes go from 00-59.
5. Press the Start/Conrmation to nish setting the minute minder. The Minute Minder will then begin
to count down.
6. When the Minute Minder has nished counting down the appliance will beep 10 times. This signals
the end of the minute minder.
Note: The Minute Minder can be cancelled during set-up by pressing the Pause/Off key. The Minute
Minder can be cancelled at any point once it has been set by pressing the Pause/Off key twice.
Resetting the minute minder, allows the user to amend the desired time by repeating the steps above.
Semi-Automatic Cooking (To Use Your Appliance)
1. Begin by turning K1 to the desired cooking function. The selected function will be shown on the
appliance display.
2. Adjust K2 to change the cooking temperature. Note that some functions (light only, Defrost etc) will
not have a temperature option.
3. Press the Start/Conrmation key to set the function and temperature.
4. Adjust K1 to set the cooking time (if not adjusted, the default cooking time is set to 9 hours)
5. Press the Start/Conrmation key to conrm cooking time.
6. To change cooking temperature or cooking time, simply adjust the relevant knob to the desired
setting and press the Start/Conrmation key to conrm your choice.
7. When cooking has nished, the appliance will beep 5 times.
Note: Press the Pause/Off key once to pause cooking. Press the Pause/Off key twice to cancel
cooking.
Fully Automatic Cooking (To Use Your Appliance)
The time of day must be set before using this function.
1. Press the Clock key once, and the hour gures will begin to ash.
2. Rotate K2 to adjust the hour gure. The numbers go from 0-23. This will set the time you want your
cook function to begin.
3. Press the clock key to set the hours and move onto the minutes.
4. Rotate K2 to adjust the minutes gure. The minutes go from 00-59 (Do not press the clock key
after selecting the timer as this will adjust the time of day)