EasyManua.ls Logo

Belling FS50GTCL - 3.5 Electrical Connection and Safety

Belling FS50GTCL
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
3.5 Electrical connection and safety measures
When it comes to connecting your appliance, please follow the instructions below carefully:
- The earthing cable (the green and yellow wire) must be connected to the earth terminal.
Make sure the insulated cable is connected to a power source during the connection of the
cable.
- If there is not any appropriate earthed electrical outlet that conforms to regulations then
call an authorised service immediately.
- The earthed electrical outlet must be near to the appliance – never use an extension cord.
- Make sure the supply cable doesn't touch the product surface, because the appliance
surface gets hot during use.
- In case of any damage to the supply cable, you must call and arrange a certified and
qualified electrician to replace the cable for you.
- You may damage the appliance if it's wired incorrectly. Any damage due to incorrect wiring
will not be covered under the warranty.
- This appliance is designed to connect to a 230 V 50Hz of electricity. If your electricity
supply is different than the value above, then call a qualified and authorised service
immediately.
- The electric cable must not touch hot parts of the appliance or the back of the appliance,
otherwise the cable may get damaged and cause the appliance to short-circuit.
- The manufacturer declares that it has no responsibility against any kind of damages or
losses that are caused by improper connections that are performed by unauthorized
people.
L
N
BROWN
YELLOW+GREEN
BLUE

Related product manuals