Belling FS50GTCL - Maintenance; Cleaning Stainless Steel Parts; Changing the Oven Lamp; Other Maintenance Checks

24
- Do not wash them when they're still hot from cooking.
- Do not use harsh/abrasive powders or cleaning materials.
- Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the enamel for a long
time.
Cleaning stainless steel parts
- Clean any stainless steel parts on a regular basis.
- Wash them in warm soapy water.
- Dry thoroughly with a cloth.
- Do not wash them when they're still hot from cooking.
- Do not use harsh/abrasive powders or cleaning materials.
- Do not leave vinegar, coffee, milk, salt, water, lemon or tomato juice on the enamel for a
long time.
5.2 MAINTENANCE
Changing the oven lamp
- Turn off the electricity supply to the oven and take the plug out.
- Make sure the oven is cool.
- Remove the cover from in front of the lamp and take the bulb out.
- Place new bulb in (230 V, 25 Watt, Type E14).
- Make sure the new bulb has a heat resistance up to 300°C.
- Place the lamp protective glass back over the lamp.
Other maintenance checks
- Regularly check the gas connection pipes.
- Even if you detect the smallest change in the pipe, contact a registered gas technician to
change it.
- We recommend to change the gas connection parts once a year
- If you notice anything different when using the control knobs, contact an authorised service.