Warning: Do not use the ceramic hob
if the glass surface is cracked, as elec-
trical parts are immediately beneath.
Switch off the appliance at the supply
to prevent electric shock and contact
your supplier.
Before using the hob for the
first time
Before using the hob for the first time,
apply a thin coating of cleaner
conditioner and polish the surface with
a clean dry cloth.
The conditioner gives a protective
covering to the ceramic glass which
not only makes the hob easier to
clean, but also ensures you will gain
maximum life out of this product.
Using the hotplate elements
To switch on, turn the control knob for
the selected hob element to the desired
setting.
Note: The marked settings on the hob
controls do not indicate any set
temperature and cannot be used to
compare the performance of one ring
with another.
The hob rings may cycle on and off
automatically during use as a means
of regulating heat output.
To switch off, return the control knob to
the “off” position.
Care and cleaning
See ‘Cleaning the Hob’ section.
WARNING!
The hob surface remains hot after use.
DO NOT TOUCH.
5
USING THE HOB
To Next Page
Loading...
