EasyManua.ls Logo

Belling FSE608D Blk - 2 Installation and Preparation for Use; Instructions for the Installer

Belling FSE608D Blk
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 11
2. INSTALLATION AND
PREPARATION FOR USE
WARNING : This appliance must be
installed by an authorised service
person or qualified technician,
according to the instructions in this guide
and in compliance with the current local
regulations.
Incorrect installation may cause harm
and damage, for which the manufacturer
accepts no responsibility and the
warranty will not be valid.
Prior to installation, ensure that the local
distribution conditions (electricity voltage
and frequency and/or nature of the gas
and gas pressure) and the adjustments
of the appliance are compatible. The
adjustment conditions for this appliance
are stated on the rating label/data badge.
The laws, ordinances, directives and
standards in force in the country of use
are to be followed (safety regulations,
proper recycling in accordance with the
regulations, etc.).
2.1 Instructions for the Installer
General instructions
After removing the packaging material
from the appliance and its accessories,
ensure that the appliance is not
damaged. If you suspect any damage,
do not use it and contact an authorised
service person or qualified technician
immediately.
Make sure that there are no flammable
or combustible materials in the close
vicinity, such as curtains, oil, cloth etc.
which may catch fire.
The worktop and furniture surrounding
the appliance must be made of
materials resistant to temperatures
above 100°C.
The appliance should not be installed
directly above a dishwasher, fridge,
freezer, washing machine or clothes
dryer.
The appliance can be placed close to
other furniture on condition that, the
hotplate of the cooker must not be
lower than the adjacent worktops to
reduce the risk of fire or damage.
A (mm) 420
B (mm) Cooker Hood/Cupboard 650/700
C (mm) Spacing
20
D (mm) Product Width
E (mm) 50
Please refer to installation diagram on the
next page.
Installation of the Cooker
There should be a minimum 2cm blank
space around the appliance for air
circulation.
If a cooker hood or cupboard is to be
installed above the appliance, the safety
distance between cooktop and any
cupboard/cooker hood should be as
shown below.

Related product manuals