Belling FSE608D Blk - Page 18

EN - 18
flash on the display. Press any key to stop
the audible warning and the symbol will
disappear.
Semi-automatic time adjustment
(cooking period)
This function helps you to cook for a fixed
period of time. A time range between 0 and
10 hours can be set. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “MODE” until
you see “dur” and
symbol on the display
screen. The symbol “A”
will flash.
3. Select the desired
cooking time period
using the “+” and “-”
keys.
4. The current time
will reappear on
the screen, and the
symbols “A”, and
will remain illuminated.
When the timer reaches the end time, the
oven will switch off and an audible warning
will sound. The symbols “A” and will
flash. Turn both control knobs to the “0”
position and press any key on the timer to
stop the warning sound. The symbols will
disappear and the timer will switch back to
manual function.
Semi-automatic time adjustment
(finishing time)
This function automatically starts the oven
so that cooking will finish at a set time. You
can set an end time of up to 10 hours after
the current time of day. Prepare the food for
cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “MODE” until
you see “end” and
symbol on the display
screen. “A” and the
current time of day will
flash.
3. Use the “+” and
“-” buttons to set the
desired finishing time.
4. The current time
will reappear on the
screen, the symbols
“A”, and will
remain illuminated.
When the timer reaches the end time, the
oven will switch off and an audible warning
will sound. The symbol “A” and will
flash. Turn both control knobs to the “0”
position and press any key on the timer to
stop the sound. The symbol will disappear
and the timer will switch back to manual
function.
Full-automatic programming
This function is used to start cooking after
a certain period of time and for a certain
duration. A time of up to 10 hours after the
current time of day can be set. Prepare
the food for cooking and put it in the oven.
1. Select the desired cooking function and
the temperature using the control knobs.
2. Press “MODE” until
you see “dur” and
symbol on the screen.
The symbol “A” will
flash.
3. Select the desired
cooking time period
using the “+” and “-”
keys.