EasyManua.ls Logo

Belling G552 Enfield - Packaging and Connection Safety; Packaging Disposal Guide; Mains Ignition Failure Troubleshooting; Gas and Electrical Connection Safety

Belling G552 Enfield
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Disposal of packaging
All our packaging materials are
recyclable and environmentally
friendly.
Please help us to protect our
environment by disposing of all
packaging in an environmentally
friendly manner.
Please contact your local authority
for the nearest recycling centre.
Caution: Packaging materials can
pose a risk of suffocation - keep away
from children.
Mains ignition models
A plug is fitted with a 3 amp fuse.
If the ignition fails:
n
Check there is a spark when the
ignition button is depressed. If
there is no spark, check that the
electricity supply is switched on at
the socket.
n
Check that the gas supply is
switched on.
n
Try another appliance in the sock-
et, if that works, replace the 3 amp
fuse in the cooker plug.
Gas & Electrical connection
Please refer to installation instructions
for the Gas & Electrical Safety Regulations
and the Ventilation Requirements.
In your own interest, and that of safety,
it is the law that all gas appliances be
installed by competent persons. Corgi
registered installers undertake to work
to satisfactory standards.
Disconnection of gas and electric
appliances should always be carried
out by competent persons.
Warning: This appliance must be
earthed.
4
Introduction
08 27362 00 - BEL G552 12/11/07 8:17 Page 6

Related product manuals