Belling Gas hobs - Installation Troubleshooting

INSTALLATION
13.300
Troubleshooting
Before you call Customer Care, please
checkthefollowingpoints:
Burner fails to ignite:
•Checktheelectricitysupplyison.
•Checkthefuse.
There is a spark to the burner
but it fails to ignite:
•Checkthattheameholesinthe
amespreaderareclearofwater
or deposits.
•Checkthatthegassupplyisturned
on.
Smell of gas:
•Checkthatnoneofthecontrols
have inadvertently been turned
on. If all the controls are in the off
position, turn off the gas supply &
call Customer Care.
The burner ame appears
uneven:
•Checktheburneristtedcorrectly.
•Checktheameholesintheame
spreader are clear of water or
deposits.
19