4
2. YOUR BELLING HOB
3. CLEANING
GHU573 - GHU573T GHU70GE - GHU70TGE - GHU70GC - GHU60GC
GHU70TGC
Rapid burner Rear Right 2800 W
Semirapid burner Rear Left 1750 W
Semirapid burner Front Right 1400 W
Auxiliary burner Front Left 1000 W
Ultra Rapid burner centre 3100 W
VITREOUS ENAMEL
Hotplate, burner caps, pan supports.
Cloth wrung out in hot soapy water. Stubborn stains can be removed with a cream paste approved by the
Vitreous Enamel Development Council, liquid cleaner or by rubbing with fine steel wool soap pads.
ALUMINIUM
Hotplate burner bodies.
Similar to paint cleaning above. Use a nylon brush to remove any cleaning materials, water or dirt from the
hotplate burner bodies. After cleaning, wipe dry and refit to the hob ensuring they are correctly seated.
Check parts are reassembled correctly by lighting the burners and allowing to dry out.
PLASTIC
Control knobs.
Wipe with a cloth wrung out in hot soapy water.
STAINLESS STEEL
Cloth wrung out in hot soapy water. Alternatively use a propriety stainless steel cleaner obtainable from
Belling Spares Team call 0870 458 9961
To Next Page
Loading...
