8
GAS CONNECTION
The appliance’s gas inlet fitting is a 1/2” male threaded cylindrical gas type in accordance with the ISO 228-1
standards. Make the connection using rigid pipe.
ELECTRICAL CONNECTION
This appliance must be connected by a competent person, using fixed wiring via a double pole switched
fused spur outlet with a fuse rating of 3amps, and with a contact separation of at least 3mm in all poles.
We recommend that the appliance is connected by a qualified electrician who will comply with I.E.E.
regulations.
The wires in the mains lead are coloured in accordance with the following code:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
5. INSTALLATION INSTRUCTIONS
To Next Page
Loading...
