4
G87
INSTRUCTIONS FOR THE INSTALLER
TECHNICAL INFORMATION
• All installation and maintenance must only be
carried out by qualified personnel. The manufacturer
cannot be held responsible for any damage to
persons or property resulting from an incorrect
installation of the appliance.
• The safety and automatic adjustment devices of
the appliance may, during its life, only be modified
by the manufacturer or duly authorised supplier.
• In accordance with the electricity standard the
appliance is type Y.
• The walls adjacent to and surrounding the appliance must
be able to withstand a temperature rise of 65 K.
UNPACKING YOUR OVEN
• Remove all packaging before use and check to
make sure that the appliance is in perfect condition.
If you have any doubts do not use the appliance
and call your supplier for advice. Do not move the
appliance using the handles.
• Some parts on the appliance are protected by a
plastic film. This protective film must be removed
before the appliance is used. We recommend
carefully slitting the plastic film along the edges
with a sharp knife or pin. Our products use
environmentally friendly packaging, which can be
either recycled or disposed of in the appropriate
manner.
The packaging materials should carefully
discarded and not left within easy reach of
children as they are a potential safety hazard.
DISPOSAL OF YOUR PRODUCT
To minimise the risk of injury to children please dispose
of your product carefully and safely. Remove the mains
cable (where fitted) by cutting off flush with the appliance
and always ensure that no plug is left in a condition
where it could be connected to the electricity supply. To
help the environment, Local Authority instructions should
be followed for the disposal of your product.
GENERAL
This appliance is designed specifically for domestic
purposes and Belling Appliances Limited cannot accept
responsibility if used in any other type of installation.
All Belling oven units are suitable for installation under
Belling hob units.
This appliance must not be installed over any appliance
that generates heat.
IMPORTANT
For your own safety, we recommend that your appliance
is installed by a qualified electrician.
The oven should be installed in accordance with the
latest Edition of the IEE Regulations.
TYPE XOU250/251/252/270/271
Dimensions for mounting H/W/D (mm) 570/560/540
Mains voltage AC 230 V
Operating voltage AC 230 V, 50 Hz
Upper element (kW) 0.7 (outer) + 1.8 (inner)
Lower element (kW) (XOU250/270/271 only) 1,6
Grill element (kW) 1,8
Fan element (kW) (XOU 251/252/270/271 only) 2,0
Fan only (W) (XOU 251/252/270/271 only) 25 - 29
Oven light (W) (n°2 XOU 270/271 only) 15W - E 14 - T300
Cooling fan (W) 18 - 22
TECHNICAL DATA
To Next Page
Loading...
