EasyManua.ls Logo

Bellini BOT608BK - Maintenance and Cleaning

Bellini BOT608BK
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Important
The desired cooking function must be selected before the oven will operate.
Minute Timer
Turn the knob clockwise to set the desired duration. The minute minder can be adjusted from 1 to 120 minutes.
An audible signal will sound at the expiry of the set time ,this will NOT switch the oven OFF. Switching the oven OFF has to
be manually conducted by turning Function Selection Knob to O
WARNING!
Before cleaning your oven, or performing maintenance, disconnect it from the power supply.
Do not use steam cleaners.
Do not line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking
and damage the enamel.
To protect against the risk of electrical shock, do not immerse the unit, cord or plug in water or other liquid or sprinkle
water to clean the appliance!
Do not clean the appliance when it is still hot! The inside and external surface of the oven should preferably be cleaned
by damp cloth when it is cooled down.
Wash all accessories in hot soapy water or in a dishwasher and wipe dry with a paper or cloth towel.
If you use your oven for an extended period of time, condensation may form. Dry it using a soft cloth.
Stainless Steel
All grades of stainless steel can stain, discolour or become greasy. You must clean these areas regularly by following
the procedures below, if you want your appliance to look its best, perform well and have a long life.
Care must be taken when wiping exposed stainless steel edges, they can be sharp!
The front frame around the oven can be cleaned with stainless steel cleaners if it becomes soiled or discoloured.
The stainless steel should only be cleaned with warm water and a mild detergent.
Do not use stainless steel cleaners, abrasive cleaners or harsh solvents.
Make sure you follow the polish or brushing lines in the steel.
Maintenance & Cleaning
10

Related product manuals