Bellucci BISTRO - Water Conditions; First Run

4. 2 First Run
Power connection: Take out the power cord and plug in the power.
Filling coee beans: Open the coee bean container lid, add coee
beans and install the lid.
Fill water: Open the lid, take out the water tank, and clean the inside
of the water tank. Then add pure water to the water tank until it is
80% full, and finally put it back and close the lid.
Turn on the coee machine: Press the power switch on the back of
the machine as shown, and connect the coee machine to the power
supply. Once the machine starts and the screen displays the boot
interface, it is ready to make drinks.
16