EasyManua.ls Logo

Beltronics STiR Plus - TotalShield Technology Explained; GPS Technology Explained; TrueLock Technology Explained; AutoLock Technology Explained

Beltronics STiR Plus
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Details of Settings
16 17
Voice
Voice On (Voice announcements on)
In this setting, all radar, laser, and SWS
messages (if programmed) will be
announced using a digital voice.
Voice Off (Voice announcements off)
In this setting, only the distinct audio tone
will be heard when a radar, Laser, or SWS
message is detected.
Bands
BandsDFT
In this setting, the factory default settings
for radar and laser are monitored.
This is the factory setting, and it is
highly recommended that you use your
STiR Plus in this mode.
BandsMOD
In this setting, STiR Plus will warn you
with an audible alert, and associated text
message stating which band has changed
from the original factory setting (e.g. “SWS
ON”). This warning is displayed during
the start up sequence.
WARNING: Do not turn off any
bands unless you are absolutely
certain there are no traffic radar
guns using that specific band in your
area.
Markers
MarkDFT
In this setting, all xed location reporting,
including safety cameras, red light
cameras and speed traps are reported.
MarkMOD
In this setting, only the Markers you’ve
selected will be reported.
Optional Laser Blockers
Your STiR Plus is compatible with our
optional Laser Blocker system. The system
includes a total of (3) Laser Blockers, (2
front, 1 rear). These transceivers will
automatically receive and block incoming
laser signals. See Settings once these are
connected
.
Features and Specifications
Operating Bands
X-band 10.525 GHz ±25 MHz
K-band 24.150 GHz ±100 MHz
Ka-band 34.700 GHz ±1300 MHz
Laser 904nm,
±33nm
Radar Receiver
Dual-Horn Antenna Casting
Superheterodyne, dual LNAs
Scanning Frequency Discriminator
Digital Signal Processing (DSP)
Laser Detection
Quantum Limited Video Receiver
Display Type
280 LED Alphanumeric
Bar Graph, ThreatDisplay™ or
Tech Display™
Automatic, plus 4 levels of fixed
brightness including full Dark
Power Requirement
12VDC, Negative Ground
Settings
Pilot
GPS
AutoLock
Speed Check
Meter
AutoMute
Units
Voice Alerts
Bands
Markers
Sensitivity Control
Highway
AutoScan
City and City NoX
Additional Patented Technology
AutoLock™
Mute/AutoMute™/SmartMute™
TotalShieldTechnology
Specifications

Other manuals for Beltronics STiR Plus

Related product manuals