Need help?Do you have a question about the BEMIS NextStep and is the answer not in the manual?
Step 1: Insert bolts into the toilet bowl mounting holes.
Step 2: Attach nuts to the bolts to secure the seat.
Step 3: Tighten the nuts securely.
Step 1: Unlock the hinges on the toilet seat base.
Step 3: Insert the mounting bolts through the toilet bowl.
Step 6: Attach nuts finger-tight to secure the seat.
Step 8: Tighten lower section of STA-TITE® nuts until they snap off.
Activate slow-close modules by raising and lowering cover and ring.
Step 5: Tighten STA-TITE® nuts until they snap off.
Step 7: Tighten lower section of STA-TITE® nuts until they snap off.
General| Type | Toilet Seat |
|---|---|
| Material | Plastic |
| Load Capacity | 250 lbs |
| Shape | Elongated |
| Features | Slow Close |
| Color | White |
| Depth | 18.5 inches |
To Next Page