D2400 Homogenizer Manual Chapter 4 Operation Guide
─ 10 ─
Bead Ordering Information
All beads are sold in prefilled, 2.0ml tubes, packs of 50
Standard Glass Beads, acid washed
D1031-01 0.1mm
D1031-05 0.5mm
D1031-10 1.0mm
Triple pure Zirconium Beads, acid washed, heat treated and tested to be nuclease free
D1032-01 0.1mm
D1032-05 0.5mm
D1032-10 1.0mm
D1032-15 1.5mm
D1032-30 3.0mm
D1032-SK Starter kit containing 10 tubes each of 0.1mm, 0.5mm, 1.0mm, 1.5mm and 3.0mm
Standard Stainless Beads, acid washed
D0133-28 2.8mm
7. Sample preparation
As heat generated by grinding process can cause damage to the sample, it is recommended that
the samples be added to the tube containing the beads and then stored for 12 hours at low
temperature (below -60℃), to achieve the best results
To Next Page
Loading...
