13
ASSEMBLY
UNPACKING
1.
2. Remove all packing materials and shipping devices if applicable.
3. Make sure the delivery contents are complete and free of any damage.
but contact Customer Service @ 1-866-349-8665. Using an incomplete or
damaged lawn mower represents a hazard to people and property.
4. Ensure that you have all the accessories and tools needed for assembly
and operation. This also includes suitable personal protective equipment.
WARNING: The product must be fully assembled before operation! Do not
use a product that is only partly assembled or assembled with damaged parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product!
Do not connect the product to battery power before it is completely assembled!
NOTE: Take care of small parts that are removed during assembly or when making
adjustments. Keep them secure to avoid loss.
LOWER HANDLE BAR
1. Align the mounting hole of the lower handle bar with the bolt of handle support
(Fig. 1).
2. Attach the washer to the bolt and secure the lower handle bar by turning the
lever (1) up for tightening.
3. Make sure that the control cord runs up the upper side of the lower handle
bar (right).
FIG. 1
5125-016k EnProdManual P.indd 13 2020-12-17 2:09 PM
To Next Page
Loading...
