5125-016
40V MAX BRUSHLESS LAWN MOWER
20
MOWING
1. Make sure that the lawn is clear of stones, sticks, wire or other objects that
could damage the product or its product.
2. Do not cut wet grass because it tends to stick to the underbody of the mower,
preventing the proper discharge of grass clippings, and it could also cause you
to slip and fall.
3.
lawn. In the autumn, lawns should only be cut as long as there is growth.
4. Slowly push the mower forward.
5.
for mowing lawns is straight lines along one of the sides.
This will keep the rows even and ensures that all the lawn
is cut without missing any spots.
6.
middle of the lawn, cut a row or two around the circumference
of the bed.
7. Pay special attention when changing direction.
8. Empty the grass catcher regularly.
WARNING: If the mower strikes a foreign object stop immediately!
Let the mower cool down and thoroughly inspect the product for damage!
Have any damage repaired before restarting!
AFTER USE
1.
and let them cool down.
2. Check, clean and store as described below.
FIG. 11
2
1
Self Propelling
Lever
Starting Lever
5125-016k EnProdManual P.indd 20 2020-12-17 2:09 PM
FIG. 12
1
2
3
To Next Page
Loading...
