Do you have a question about the Benchmark AHB2 and is the answer not in the manual?
Signal to Noise Ratio | >130dB, A-weighted |
---|---|
Type | Stereo Power Amplifier |
Power Output | 100W into 8 Ohms, 190W into 4 Ohms |
THD+N | <0.00013% at 1kHz, at 100W into 8 Ohms |
Input Impedance | 50 kOhms |
Damping Factor | > 300 |
Frequency Response | 0.1 Hz to 200 kHz (-3 dB) |