Benchmark AHB2 User Manual

AHB2 Instruction Manual Rev F Page 4
Important Safety Instructions
Safety Symbols
This symbol alerts the user that there are important operating and maintenance
instructions in the literature accompanying this appliance.
This symbol alerts the user to the presence of uninsulated voltages within the unit that can
cause dangerous electric shocks.
This symbol alerts the user to the presence of voltages at the output connectors that can
cause dangerous electric shocks.
This symbol alerts the user that the product can only be used safely at altitudes lower than
2,000 meters.
This symbol alerts the user that the product can only be used safely in non-tropical
climates.

Benchmark AHB2 Specifications

General

Signal to Noise Ratio	>130dB, A-weighted
Type	Stereo Power Amplifier
Power Output	100W into 8 Ohms, 190W into 4 Ohms
THD+N	<0.00013% at 1kHz, at 100W into 8 Ohms
Input Impedance	50 kOhms
Damping Factor	> 300
Frequency Response	0.1 Hz to 200 kHz (-3 dB)