EasyManua.ls Logo

Benchmark BG4500i - STARTING YOUR GENERATOR

Benchmark BG4500i
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
4.1 STARTING YOUR GENERATOR
WARNING!
Before using the generator, a ground wire may need to be
connected to the ground terminal. The terminal is located on the
front panel. Before using the ground terminal consult a qualified
electrician.
NOTE
Shipping restrictions for li-ion batteries require the batteries to be
shipped at a low state of charge. It is recommended to manually recoil
start the generator when starting the rst time.
If there is no battery in the generator or the battery has died, the
generator can only be started using the recoil method. If there is a
battery and it is drained, running the generator will slowly recharge the
battery.
4.1.1 Remote Start
1. Push the battery power switch to ON.
2. Rotate the fuel valve to OPEN.
3. Check the Remote Start Ready light is on. Generator will remain in remote
start standby mode for 10 days.
4. Press the START button for no more than 2 seconds to re up the generator.
If it does not start after 5 attempts consult the troubleshooting chapter.
OPEN
ON
OPEN
START
ON
1
4
2 3
1 2 3

Table of Contents

Related product manuals