34
7.7 HOW TO SYNC A NEW REMOTE (REMOTE PAIRING)
A new remote can be synced following the steps below.
DANGER!
DO NOT perform this procedure indoors it may cause the
generator to start. See ‘Starting the Engine’ for more details.
1. Turn the battery power switch to ON.
2. Push and hold the ON/OFF electric start for 10 seconds then release to
initiate remote sync. The remote start ready light will ash green.
3. Push the START button on the remote. It will begin to pair and once
nished the remote start ready light will stop ashing.
To Next Page
Loading...
