17
TGH1410en/03.2012
5. Operation and setting
5.1 Display elements
A detailed description of the meaning of the display elements is given in the
table below.
Display elements
Ele-
ment
Function
RL Reload function with memory = off
(L = I.)
n Transformation ratio factor for a
second external measuring current
transformer.
I2 Response value I
Δn2
as mA
(Alarm 2)
I1 Response value I
Δn1
as % of I
Δn2
(Alarm 1, prewarning.)
r1, 1
r2, 2
Alarm relay K1
Alarm relay K2
I Hys,
%
Response value hysteresis as %.
ton1,
ton2,
t,
toff
Response delay t
on1
(K1)
Response delay t
on2
(K2)
Starting delay t,
Delay on release t
off
for K2
M
fault memory active
Relay operating mode K2
Password protection enabled
To Next Page
Loading...
