Bender rcm420 Operating Manual

7
TGH1410en/03.2012
2. Safety information
2.1 Safety instructions
In addition to this data sheet, the documentation of the device includes a
sheet entitled "Important safety instructions for BENDER products“.
2.2 Work activities on electrical installations
 All work activities necessary for installation, commissioning or work
activities during operation of electrical devices or systems are to be car-
ried out by adequately skilled personnel.
 Observe the relevant regulations applying to work on electrical instal-
lations, in particular DIN EN 50110 or its subsequent regulation.
 If the equipment is used outside the Federal Republic of Germany, the
respective national standards and regulations are to be observed. The
European standard EN 50110 is recommended to be used as a direc-
tive.
Unprofessional work activities on electrical installations
may result in a threat of danger to life and limb!

Bender rcm420 Specifications

General

Brand	Bender
Model	rcm420
Category	Monitor
Language	English