Bender rcm420 Operating Manual

Operation and setting
25
TGH1410en/03.2012
5.5.3 Response value setting for overcurrent:
- Response value I2 (overcurrent I
Δn2
)
- Response value I1 (overcurrent I
Δn1
)
- Hysteresis (Hys) of the response values I
Δn1
, I
Δn2
Increasing the response value I2 (alarm overcurrent)
Increasing the response value I1 (prewarning overcurrent).
Setting the hysteresis of the response value
1x
2x

Bender rcm420 Specifications

General

Brand	Bender
Model	rcm420
Category	Monitor
Language	English