Bender rcm420 - Parameter Settings: Response Values

Operation and setting
28
TGH1410en/03.2012
Alarm relay K1: Activating the category response value I2
Alarm relay K1: Deactivating the category "Alarm by device test"
When an alarm relay (K1/K2) has been deactivated in the
menu, an alarm will not be signalled by the respective
changeover contact! An alarm will only be indicated by
the respective alarm LED (AL1/AL2)!
4x
3x
>1,5 s
2x
4x
3x
>1,5 s
3x