LR-10000 Low-Rise Scissor Lift 3 P/N 5900075 — Rev. B — August 2021
Table of Contents
Introduction 3 Operation 29
Shipping Information 4 Maintenance 33
Safety Considerations 4 Troubleshooting 34
FAQs 6 Wiring Diagrams 35
Components 7 Labels 36
Specifications 8 Parts Diagrams 38
Installation Checklist 9 ALI Store 42
Installation 10 Maintenance Log 43
Introduction
This Manual describes the LR-10000, which is low-rise, frame-engaging Lift designed and engineered
for fast and easy wheel service. It is the perfect Lift for trucks and SUVs that many other Lifts cannot
handle.
The LR-10000 can raise Vehicles up to 10,000 lbs. (4,536 kg). ALI certified.
More information about the full line of BendPak products is available at bendpak.com.
This manual is mandatory reading for all LR-10000 users, including anyone who sets
up, operates, maintains, or repairs it
. Keep this manual on or near the equipment so that
anyone who uses or services it can read it. If you are having issues, refer to the Troubleshooting
section of this manual for assistance.
⚠ DANGER Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
Technical support and service is available from your dealer, on the Web at bendpak.com/support,
by email at support@bendpak.com, or by phone at (800) 253-2363, extension 196.
You may also contact BendPak for parts replacement information (please have the model and serial
number of your unit available) at (800) 253-2363, extension 191.
To Next Page
Loading...
