LR-10000 Low-Rise Scissor Lift 4 P/N 5900075 — Rev. B — August 2021
Shipping Information
Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment
before
you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition.
Do not sign the bill of lading until
after
you have inspected the shipment.
If any of the
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods
after
you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs. Our willingness to assist in helping you process your claim
does not make us responsible for collection of claims or replacement of lost or damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
⚠ WARNING California Proposition 65: This product contains chemicals known to the State
of California to cause cancer and birth defects or other reproductive harm. For
more information, visit www. P65warnings.ca.gov.
Important Safety Instructions
• Read and understand all safety warning procedures before operating the Lift.
• Make sure all Operators read and understand the Installation and Operation Manual.
Keep the
Manual near the device at all times
.
• The product is a Low-Rise Scissor Lift. Use it only for its intended purpose. Do not make any
modifications to the product.
• The product must
only
be operated by authorized personnel.
• While the Lift is in use, only the operator may be within 30 feet of the Lift.
• When the Lift is in motion, keep people and body parts well away from it.
• Keep loads centered and balanced on the Platforms.
• Never exceed the rated capacity of the Lift.
• You
must
wear OSHA-approved (publication 3151) personal protective equipment at all times
when installing, using, maintaining, or repairing the Lift: leather gloves, steel-toed boots, eye
protection, back belts, and hearing protection are
mandatory
.
• Always wear safety glasses! Everyday glasses only have impact resistant lenses, they are not
safety glasses.
• Keep hair, loose clothing, finders, and all body parts away from moving parts.
• Care should be taken as burns can occur from touching hot parts.
To Next Page
Loading...
