RBJ Series of Rolling Bridge Jacks 3 P/N 5900004 — June 2018 — Rev. C2
Table of Contents
Introduction 3 Operation 20
Shipping Information 4 Maintenance 24
Safety Considerations 4 Troubleshooting 25
Components 6 Accessories 26
FAQ 8 Labels 28
Specifications 9 Parts Sheets 30
Setup 10 Maintenance Log 54
Introduction
This manual covers the RBJ Series of Rolling Bridge Jacks, which are used with four-post Lifts to raise
two or four wheels off the Lift’s runway, making automotive service such as brake jobs and suspension
work easier to accomplish.
This manual covers the following RBJ models:
• RBJ4500: Raises up to 4,500 lbs / 2,041 kg
• RBJ6000: Raises up to 6,000 lbs / 2,721 kg
• RBJ7000: Raises up to 7,000 lbs / 3,175 kg
• RBJ9000: Raises up to 9,000 lbs / 4,082 kg
• RBJ15000: Raises up to 15,000 lbs / 6,804 kg
• RBJ18000: Raises up to 18,000 lbs / 8,165 kg
• RBJ25000: Raises up to 25,000 lbs / 11,340 kg
The RBJ4500, RBJ6000, RBJ7000, and the RBJ9000 are ALI Certified accessories for many of the
four-post Lifts with which they are used. The RBJ15000, RBJ18000, and RBJ25000 were not
submitted for ALI certification.
ALI is the Automotive Lift Institute (www.autolift.org), an independent organization whose mission is
to promote the safe design, construction, installation, inspection, and use of automotive Lifts.
This manual is mandatory reading for all users of Rolling Bridge Jacks, including anyone who installs,
operates, maintains, or repairs them.
⚠ DANGER Be very careful when installing, operating, maintaining, or repairing your unit; failure
to do so could result in property damage, product damage, injury, or (in very rare
cases) death. Make sure only authorized personnel operate the unit. All repairs
must be performed by an authorized technician. Do not make modifications to the
unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
To Next Page
Loading...
Need help?
General
