RBJ Series of Rolling Bridge Jacks 4 P/N 5900004 — June 2018 — Rev. C2
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
If you are having issues, refer to the Troubleshooting section of this manual for assistance.
Technical support and service is available from your dealer, on the Web at bendpak.com/support,
by email at techsupport@bendpak.com, or by phone at (800) 253-2363, extension 196.
You may also contact BendPak for parts replacement information (please have the model and serial
number of your unit available) at (800) 253-2363, extension 191.
Shipping Information
Your unit was carefully checked before shipping. Nevertheless, you should thoroughly inspect the
shipment before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
condition. To protect yourself, do not sign the bill of lading until after you have inspected the shipment.
If any of the items listed on the bill of lading are missing or are damaged, do not accept the shipment
until the carrier makes a notation on the bill of lading that lists the missing and/or damaged goods.
If you discover missing or damaged goods after you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.
Safety Considerations
Read this manual carefully before using your new product.
Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
Rolling Bridge Jack Safety Information
Please note the following:
• The product is a Rolling Bridge Jack. Use it only for its intended purpose.
• The product should only be operated by authorized personnel.
• When the product is in use, keep all body parts away from it.
• Do not make any modifications to the product.
⚠ WARNING When the Rolling Bridge Jack is on a raised Lift, do not go under it! If you notice a
Roller out of position, get everyone out from under the Lift, lower the Lift, reposition
the Rollers back onto the Utility Rail, and then make sure the Safety Brackets and
Adjustment Bolts are correctly installed and adjusted.
To Next Page
Loading...
Need help?
General
