Need help?Do you have a question about the Benelli 750 Sei and is the answer not in the manual?
General| Displacement | 747 cc |
|---|---|
| Transmission | 5-speed |
| Front Suspension | Telescopic fork |
| Front Brakes | Dual disc |
| Compression Ratio | 9.8:1 |
| Ignition | Electronic |
| Starting | Electric |
| Final Drive | Chain |
| Rear Tire | 4.00-18 |
| Power | 76 hp |
| Rear Suspension | Twin shock absorbers |
| Dry Weight | 220 kg |
| Induction | 6x Dell'Orto VHB 24 carburetors |
| Front Tire | 3.50-18 |
| Wheelbase | 1, 490 mm |
| Top Speed | 200 km/h |
| Frame Type | Steel tubular |
| Engine Type | Air-cooled inline six-cylinder, four-stroke |
| Max Power | 76 hp (56 kW) |
Details engine type, cylinders, bore, stroke, displacement, compression ratio, power.
Covers oil level check, engine oil change, filter, front fork oil, and chain lubrication.
Covers carburetion data, synchronization, valve timing, clearance, and ignition advance.
A chart detailing periodic maintenance tasks by mileage intervals.
Lists specific torque values for various bolts and nuts used in the engine and chassis.
Step-by-step instructions for safely removing the engine unit from the motorcycle frame.
Instructions for reinstalling the engine unit, reversing the removal process.
Covers brake system maintenance, caliper service, fluid bleeding, and disc checks.
Details rear suspension, wheel spoke adjustment, balance, steering, and front fork.
Instructions for preparing and charging a new battery before its initial service.
Comprehensive wiring diagram for the 750 SEI model, illustrating electrical connections.
Wiring diagram specific to the 750 SEI USA version, showing its electrical layout.
Comprehensive wiring diagram for the 500 QUATTRO model, illustrating electrical connections.
To Next Page
