Benelli TNT300 Owner's Manual

TnT300
VIN AND ENGINE NUMBERS
The Vehicle Idencaon Number (VIN) and the Engine Number are used for the registraon of the vehicle, this will also help any
dealerships idenfy your motorcycle when providing service, parts or accessories.
Record these numbers here for easy reference and use in the future.
The Vehicle Idencaon Number (VIN) is stamped into the right side of the frame along the steering stem tube.
The Engine Number is stamped into the lower crankcase of the engine on the right hand side.
Please write these numbers down below for your reference.
VIN:
Engine Number:
SERIAL NUMBER

Benelli TNT300 Specifications

General

Displacement	300 cc
Cooling System	Liquid cooled
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Seat Height	795 mm
Dry Weight	196 kg
ABS	Dual-channel ABS
Engine Type	Liquid Cooled, 4-stroke, DOHC, In-line 2-cylinder
Max Torque	27 Nm @ 9, 000 rpm
Front Suspension	Upside-down telescopic fork
Rear Suspension	Hydraulic mono-shock absorber
Front Brake	Twin 260 mm discs with 4-piston calipers
Rear Brake	240 mm single disc with single-piston caliper
Fuel Tank Capacity	16 liters