-03- -04-
Danger of possible electric shock
Instrument with double or reinforced insulation
DC
AC
Ground terminal
Danger
Do not measure if the voltage is above 600V.
Do not test at flammable / explosive hazard.
Do not measure if the unit or your hand is wet.
Do not go beyond the range of the tester
Do not open the battery door under measuring.
Do not touch any naked lead under measuring
Make sure turn off the unit after measurement.
Warning
The tester must be operated according to this manual
by qualified person who have passed the training.
Do not open the case while testing. If the tester does
not work properly, please return for repair.
Do not replace the batteries in a humidity condition.
Make sure the wire firmly connected to the tester.
Make sure to turn off the power before opening the
battery door.
Check the tester regularly, do not operate if the tester
is not normal(such as lead wire is cracked, the case
broken etc.)
Do not attempt any alterations. Please contacted your
dealer if the tester need to be repaired.
Symbol：
Features and functions
Auto- discharge function to make, the operation safe.
LCD Back-light.
Digital readout display.
Live circuit warning symbols with audio sounds.
Auto- power off function (in 10 minutes without operation)
Timer measurement function.
Low battery indication
PI measurement (Polarization index measurement)
Suitable for 12V DC adapter (12V/1A)
To Next Page
Loading...
