EasyManua.ls Logo

Beninca HEADY 24 3B - Installation and Mounting; Mounting Procedure

Beninca HEADY 24 3B
48 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HEADY
Rimuovere le 4 viti A , quindi rimuovere il coperchio B
Sul fondo del contenitore centrale sono presenti 4 predisposi-
zioni (C) da rompere con un cacciavite.
Posare il fondo alla parete e segnare i 4 punti di foratura.
Eseguire 4 fori ed inserire 4 tasselli (E), fissare la centrale con
le 4 viti D. Tasselli e viti sono fornite in dotazione.
Remove the 4 screws A and then remove cover B
There are 4 set-ups (C) present on the base of the control unit
container, which must be broken using a screwdriver.
Place the base on the wall and mark the 4 drilling points.
Make the 4 holes and insert the 4 plugs (E), fix the control unit
with the 4 screws D. Plugs and screws are supplied.
Entfernen Sie die 4 Schrauben A und nehmen Sie Deckel B ab.
Im Boden des Hauptgehäuses befinden sich 4 vorbereitete Öff
-
nungen (C), die mit einem Schraubenzieher aufzubrechen sind.
Halten Sie den Boden an die Wand und zeichnen Sie die 4 Boh
-
rungen an.
Führen Sie die 4 Bohrungen aus und setzen Sie 4 Dübel (E) ein.
Fixieren Sie die Steuerung mit den 4 Schrauben D. Dübel und
Schrauben werden mitgeliefert.
Enlever les 4 vis A puis enlever le couvercle B
Au fond du boîtier de la centrale se trouvent 4 ouvertures spé-
ciales (C) qu’il faut creuser à l’aide d’un tournevis.
Appuyer le fond du boîtier contre le mur et marquer avec 4
signes les points de perçage.
Percer les 4 trous et insérer les 4 chevilles (E), fixer la centrale
avec les 4 vis D. Les chevilles et les vis sont fournies en do-
tation.
Quite los 4 tornillos A, entonces quite la cubierta B
En el fondo de la caja central hay 4 predisposiciones (C) que
hay que romper con un destornillador.
Apoye el fondo a la pared y marque los 4 puntos de perforación.
Realice los 4 agujeros e introduzca los 4 tacos (E), fije la central
con los 4 tornillos D. Se proporcionan los tacos y los tornillos.
Wykć śruby A i ściągnij pokrywę B.
Śrubokrętem zrób 4 otwory (C)na tylnej ściance skrzynki. Przóż
skrzynkę do ściany i zaznacz 4 miejsca na otwory. Wywierć ot
-
wory, wsadź 4 kołki(E), przykręć skrzynkę wkrętami (D).
A
C
B
E
D

Related product manuals