EasyManua.ls Logo

Bennett Read ONE 114 R

Bennett Read ONE 114 R
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Attach cleaning solution spray pipe extension (34) to loose end of spray pipe
Secure spray pipe to outside surface
of extension wand (28) using 2 of the
securing clips (23)
Attach loose end of spray pipe extension to the carpet deep cleaning attachment (31)
- to attach pipe, insert and turn pipe clock wise 90 degrees (quarter turn)
- to release, turn anticlockwise 90 degrees and remove
21
22 23
YOU ARE NOW READY TO START DEEP CLEANING!
Grasp the plug (11) at the rear of the machine and pull power cable to its full extent (See warnings).
DO NOT extend power cable beyond red warning line on power cable. Insert Plug into the main power
supply. Your BENNETT READ ONE is equipped with an automatic cord rewind function. After unplugging
the machine from the wall socket, give the power cable a short sharp tug and then let the automatic cord
rewind slowly retract the power cable
Press power on button (1). If machine is on,
the led light on the switch will be illuminated.
Press pump on button (2). If pump is on,
the led light on the switch will be illuminated
24 25
POWER SWITCH
PUMP SWITCH

Related product manuals