Bennett Read WHISPER User Manual

9
REPLACING/CLEANING THE
POST-MOTOR HEPA FILTER
The post-motor HEPA filter assists in
the filtration process that returns
cleaner air back into your home.
• Unplug the vacuum from the
electrical outlet
• Open the Dirt Container lid
• Remove the Dust Bag
• Remove the HEPA filter by lifting
the tab (indicated with an arrow
on the filter cover) and pulling the
filter outward
• Replace the post-motor HEPA filter
by sliding it back into the slot and
pressing down firmly on the arrow
until it clips into place
The post-motor HEPA filter is NOT
washable with water. Only use a
brush or compressed air to clean
the HEPA filter.
!
CAUTION:
DO NOT OPERATE YOUR
BENNETT READ WHISPER
WITHOUT IT’S FILTERS IN
PLACE OR WITH WET/DAMP
FILTERS. SERIOUS DAMAGE
WILL BE CAUSED TO THE
MACHINE IF NOT OPERATED
ACCORDING TO THIS USER
GUIDE AND WILL VOID YOUR
WARRANTY.
!
WARNING:
Your Bennett Read Whisper is
equipped with a Thermal
Cut-off function that is
designed to protect the motor
from overheating. Should the
machine switch off while
working, unplug the vacuum’s
power cord from the wall
socket, then check and clean
all filters as explained in this
User Guide. Allow your
vacuum to cool down before
switching it back on. See the
Troubleshooting Guide for
more information.
!
NOTE:
Use only Bennett Read WHISPER
replacement filters in your vacuum.
Replacement parts can be purchased
from selected retail stores or directly from
Tevo. See page 11 for details
!
CAUTION:

Bennett Read WHISPER Specifications

General

Brand	Bennett Read
Model	WHISPER
Category	Vacuum Cleaner
Language	English