10
TROUBLESHOOTING
Vacuum cleaner
won't switch on
PROBLEM POSSIBLE CAUSES REMEDIES
1. Power cord not firmly plugged in, or
is not switched on at the wall socket
1. Check electrical plug
Weak suction
power
Visible dust
escaping from the
machine while
vacuuming
1. Dust bag full 1. Remove and clean
dust bag and filters
2. Check and clean filter
regularly
2. Pre-Motor filter clogged/dirty
3. Check and clean filter
regularly
1. Check and install all
filters as explained in
this User Guide
3. Post-Motor HEPA filter clogged/dirty
ACCESSORIES
4
5
1
3
1. Filter bag/pre or post motor filters
are not installed properly
2. Clean all filters as
explained in this
User Guide
2. Filter bag and filters are dirty
17 1915 16
2
1. Floor nozzle
2. Extension wand
3. Airflow regulator
4. Handle
5. Hose
15. Dusting brush
16. Upholstery tool
17. Crevice nozzle
19. Turbobrush
To Next Page
Loading...
Need help?
General
