Bennett Read WHISPER User Manual

4. Connect floor nozzle (1) to the end
of the extension wand (2) and twist
slightly to tighten:
5. Once assembled, you can store
your vacuum by inserting the storage
clip (located on the back of the floor
nozzle) into the storage slot on the
rear of the vacuum:
6
AUTOMATIC CORD REWIND
Your vacuum is equipped with an
automatic cord rewind. When
cleaning is finished, switch the
electricity off at the wall socket and
disconnect the plug from the electrical
outlet. Hold the plug and press the
automatic cord rewind button to
rewind the power cord:
POWER BUTTON
Turn the power ON or OFF by
pressing lightly downward on
the power button:
VARIABLE SUCTION CONTROL
The power button also controls the
suction power of your Bennett Read
WHISPER:
A. Settings 1 and 2 are suitable for
delicate areas and fabrics such as
curtains, blinds, upholstery & area rugs:
OPERATIONS
POWER CORD
The power cord is located at the rear
of the vacuum. Gently pull out the
power cord:
Stop pulling the power cord once the
yellow line is visible. There is also a
red line, which indicates the end of
the useable cord. Do not pull the
power cord out beyond the red line.
Failure to adhere to this will render
your guarantee void.
Setting 1:
Setting 2:

Bennett Read WHISPER Specifications

General

Brand	Bennett Read
Model	WHISPER
Category	Vacuum Cleaner
Language	English