47 Menu operation
Function descriptions
Reset System Reset/Cancel
Menu Descriptions
Language Sets the language for the On-Screen Display (OSD) menus.
Background
Settings
• Background Color
Sets the background color for the projector.
• Splash Screen
Allows you to select which logo screen will be displayed during projector
start-up.
Menu Settings
• Menu Type
Sets the OSD menu type according to your needs.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
• Reminder Message
Sets the reminder messages on or off.
Light Source
Information
This menu page displays the following information:
• Light Source Usage Time
• Light hours used under Normal Mode, ECO Mode, SmartEco Mode,
Custom Mode.
• Equivalent Light Hours
• Refer to UM for detailed formula: refer to Getting to know the light hour
on page 51 for light source usage formula.
Standby Settings
• Standby Mode
• Eco: The projector maintains at normal standby mode with less than
0.5W power consumption.
• Normal: Allows the projector to provide network, monitor out and
audio pass through functions in standby mode.
• Audio Pass Through
The projector can play sound when it is in standby mode and the
corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See Connection on page 23 for
how to make the connection.
To Next Page
