BenQ DC C610 - Playback Mode LCD Monitor Information (Video); Playback Mode - the Basics; Viewing Images or Videos; Magnifying Images

English
Using the Camera14
3.3.2 Playback mode LCD monitor information (video)
3.3.3 Playback mode - the basics
3.3.3.1 Viewing images or videos
To play back still images or videos one at a time:
1. Press [ ] to enter Playback mode.
The last recorded image appears on the LCD monitor.
2. View and select your captured images by using the [ ] / [ ] button.
• To view the previous image, press the [ ] button.
• To view the next image, press the [ ] button.
• To play a video, press [OK].
• To exit Playback mode [ ], press the MODE button.
• The print indicator [ ] only appears on the LCD monitor when the image is set to print
out.
• If there is no image stored in the internal memory or on the memory card, [No Image]
message will appear on the LCD monitor.
3.3.3.2 Magnifying images
While reviewing your images, you may enlarge a selected portion of an image. This
magnification allows you to view fine details.
1. Press [ ] to enter Playback mode.
The last image frame appears on the LCD monitor.
2. View and select your images by using the [ ] / [ ]
button.
3. Enlarge the image by pressing the OK button.
4. Press the OK button continuously to switch to different
magnification ratio.
100-0002
Size
EV.
2006.02.10
320X240
0.3
10:34
0002
00:00:26
DC_C610_UM.book FRI, September 22, 2006