English
Using the Camera 13
3.Use [] / [] to select the desired images.
• To view the previous image, press the [ ] button.
• To view the next image, press the [ ] button.
• Click OK to toggle between different display modes of playback information.
• If there is no image stored in the internal memory or on the memory card, [No Image] mes-
sage will appear on the monitor.
3.4.3.3.2 Magnifying images
While reviewing your images, you may enlarge a selected portion of an image. This
magnification allows you to view fine details. The zoom factor displayed on the screen shows
the current magnification ratio.
1. Press the [ ] button.
• The last captured image appears on the LCD monitor.
• To view the previous image, press the [ ] button.
• To view the next image, press the [ ] button.
2. Adjust the zoom ratio by using the Zoom [W] / [T]
button.
• To enlarge the selected image, press the [T] button.
• To return to the normal image, press the [W] button.
• The magnification factor is displayed on the LCD monitor.
3. To view different portion of the images, press the [ ] / [ ] / [ ] / [ ] button to
adjust the display area.
• The magnification factors can be adjusted smoothly from 1x to 8x (4x for a 0.3M image).
3.4.3.3.3 Thumbnail display
This function allows you to view up to 9 thumbnail images on the LCD monitor
simultaneously so you may search for a particular image.
1. Press the [ ] button.
The last captured image appears on the LCD monitor.
2. Press the [W] / [ ] button once.
• Maximum nine thumbnail images are displayed
simultaneously.
• For recorded video clips, the [ ] video mode icon
will be displayed.
3. Use the [ ] / [ ] / [ ] / [ ] button to select the image to be displayed at regular
size.
4. Press the OK button to display the selected image on full screen.
SD
1
2
3
4
5
6
7
8
9
DC_C630_UM.book Page 13 Tuesday, February 14, 2006 10:01 AM
To Next Page
Loading...
Need help?
General
