BenQ DC E720 - Using the Menus; REC Menu List (Still Image)

English
Using the Camera12
3.4.2 Using the menus
When a menu is displayed, the four-way control and the OK button are used to make the
desired settings.
1. Turn the power on, and set the camera to the REC mode.
2. Press the
MENU button to display the menu.
3.Press [] / [] to select a menu item.
4. Press [ ] / [ ] to change the setting.
5. Press the
MENU or the OK button to save the settings and close the menu.
3.4.2.1 REC menu list (still image)
Menu item Available settings
Resolution
/ / / / / /
Quality
/ /
Metering
/ /
White Balance
Auto / / / / / /
ISO
Auto / / / /
Exposure -2.0 EV ... +2.0 EV
Drive Mode
Off / / / /
AEB
Off /
Highlight
Off / / /
Sharpness
/ /
Effect Off / B&W / Sepia / Negative / Red / Green / Blue
Date Stamp Off / Date / Date & Time
Digital Zoom Off / On
AF lamp Off / On
DC_E720_UM.book Page 12 Wednesday, September 6, 2006 5:04 PM