English
Preparing Your Camera for Use4
2 Preparing Your Camera for Use
2.1 Installing the Battery
We highly recommend that you use only the
specified rechargeable lithium-ion battery
for your camera. Make sure that the power
of the camera is off before inserting or
removing the battery.
To insert the battery:
1. Open the battery/SD memory card
cover (A).
2. Insert the battery in the correct direction
shown (B).
3. Push the battery all the way down, until
the battery lock lever clicks into place
(C).
4. Close the battery/SD memory card cover
(D).
To remove the battery:
1. Open the battery/SD memory card
cover.
2. Release the battery lock lever.
3. When the battery has come out a little,
gently pull it out the rest of the way.
A
B
C
D
DC_E720_UM.book Page 4 Wednesday, September 6, 2006 5:04 PM
To Next Page
Loading...
