22” LCD Color Monitor BenQ G2200W
4
Power Safety
1.The AC plug isolates this equipment from the AC supply.
2.The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be
installed near the equipment and be easily accessible.
3.This product should be operated from the type of power indicated on the marked label. If you are not sure of the
type of power available, consult your dealer or local power company.
2.3 General Description
This new LCD (Liquid Crystal Display) monitor BenQ G2200W offers numerous features and functions, for example:
● TFT display (Thin Film Transistor; active matrix)
● minimal space requirements thanks to slim casing
● optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into
the corners)
● high degree of brightness and good contrast
● high resolution (1680x1050)
● presentation of up to 16.7 million colours (in conjunction with an appropriate graphics card)
● automatic scanning of horizontal frequencies from 31 to 83 kHz and refresh rates (vertical frequencies) from 55 to
76 Hz (absolutely flicker-free)
● digital screen controller with microprocessor for storing 22 different display modes
● freely adjustable colour alignment for matching the screen colours to the colours of various input and output
devices
● convenient operation via integrated OSD (On-Screen-display) menu
● VESA-DDC compatibility
● plug&play capability
● power management for reducing power consumption when the computer is not in use
● compliance with the recommendations in accordance with TCO’03
This operating manual contains important information you require to start up and run your LCD monitor.
A graphics card (screen controller) with VGA interface or a digital graphics card with DVI interface is required to
control the BenQ G2200W LCD monitor. The monitor processes the data supplied to it by the screen controller. The
screen controller or the associated driver software is responsible for setting the modes (resolution and refresh rate).
Additional information
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed. For the best
display performance, please set the display resolution to 1680x1050 pixels with an aspect ratio of 16:10. This is
called “Native Resolution” or maximal resolution – that is, the clearest picture. Lower resolutions are displayed on a
full screen through an interpolation circuit. Image blurring across pixel boundaries can occur with the interpolated
resolution depending upon the image type and its initial resolution.
2.4 Related service information
• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool
or in a wet basement.
• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and
cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold
To Next Page
Loading...
Need help?
General
Weight and Dimensions
