BenQ LU951ST - Product Information

6
English
Product information
Shipping contents
Specifications
Control terminals
Projector
Remote control and
batteries
Installation guide Power cord
LU950/LU951 LU951ST
Display system 1-CHIP DMD
Resolution 1920 (H) x 1200 (V) WUXGA
Light source Laser diode
Throw ratio 1.36 ~ 2.18 0.81 ~ 0.89
Power consumption 530 W (Max); < 0.5 W (Standby)
Dimensions 490 mm (W) x 159 mm (H) x 380 mm (D)
Weight 9.4 Kg (20.7 lbs)
• WIRED REMOTE
For connection to a wired remote control.
• RS232
Standard 9-pin D-sub interface for connection to PC
control system and projector maintenance.
• USB MINI-B
For firmware upgrade only.
• USB TYPE A
Support 5V/2A output.
• LAN
For connection to RJ45 Cat5/Cat6 Ethernet cable to
control the projector through a network.
• HDBaseT
For connection to RJ45 Cat5/Cat6 cable to input
uncompressed high-definition video (HD).
• HDMI 2
Connection to HDMI source.
• HDMI 1
Connection to HDMI source.
• VIDEO
Connection to composite video source.
• S-VIDEO
Connection to S-Video source.
• AUDIO IN L/R
Connection to an audio input source via an audio or
audio L/R cable.
• PC IN
15-pin VGA port for connection to RGB source or PC.
• MONITOR OUT
Connection to other display equipment for concurrent
playback display. (Used with PC IN port.)
• AUDIO IN
Connection to an audio input source via an audio cable.
(Used with PC IN port.)